logo
logo
Sign in

Mesoporous structure of activated carbon

avatar
CLM
Mesoporous structure of activated carbon

When it is found that this kind of activated carbon can not be adsorbed well to the substances to be separated, which leads to the failure of separation, the first kind of activated carbon can be used.

When it is found that this kind of activated carbon to separate the material because of adsorption is too strong and can not elute, or because it is difficult to elute caused by the elution solvent is too large, the flow is not concentrated, you can use the third activated carbon.

Sometimes a combination of three activated carbons can be used to separate more complex natural pharmaceutical components.

For example, the sample to be separated is first passed through a third column of activated carbon, on which the component with the strongest adhesion to the activated carbon is adsorbed.

The unadsorbed material then passes through the second activated carbon, the less adsorbed material is adsorbed on the second column, and the unadsorbed material finally passes through the first activated carbon.www.wyactivatedcarbon.com

Thus, through three columns in turn, on which the adsorbed substances are eluted with appropriate eluents, it is possible to obtain a better separation of the very complex natural medicinal constituents.

Because of the fine particles of powdered activated carbon, it is inconvenient to operate, so in the practical application process, generally try not to use the first kind of active carbon.

No powdered activated carbon is another important reason for the adsorption of powdered activated carbon is too strong, there are many substances adsorbed on it is very difficult to elute, usually will be used after the adsorbent deactivation. activated charcoal suppliers & manufacturers

collect
0
avatar
CLM
guide
Zupyak is the world’s largest content marketing community, with over 400 000 members and 3 million articles. Explore and get your content discovered.
Read more