Power and electricity are the most important needs for humans after food and water. But the matter of fact is that electricity cuts make human work disturbed and paused. To get rid of such a problem, you need the best and most solid solution for it. A solar panel system is your answer. It's an amazing way to produce electricity on your own and connect multiple systems with it. To know more about it, read this blog as it provides a complete guide to installing a solar panel for homes.
Why should you need a solar panel?
You need a solar panel for multiple reasons:
- It's environmentally friendly.
- The best renewable energy source.
Steps to Install a Residential Solar Panel
If you want to install a solar panel on your home, here is a complete step-by-step procedure for proper Residential Solar Panel Installations:
Step 1. Mount Installation
First of all, fix the mounts that provide support for the solar panel. It can be roof-grounded or flush-mounted, depending only on your requirements. The main objective of this is to provide strength and sturdiness to the base of the solar panel system.
Proper guidance and care will be taken in the direction in which the solar power panel is installed. In this step, you’ll have to set the direction of the solar panels through which they absorb sunlight and start functioning.
The mounting structure of the panel must be tilted at an angle of between 18 and 36 degrees. It has been seen that numerous companies use solar trackers to improve overall efficiency.
Step 2. Install the Solar Panels
This step involves the installation of the panel system with the mounting structure. This is done by tightening nuts and bolts. Proper care is mandatory to make the system long-lasting.
Step 3. Perform electrical wiring
In step 3, you have to do electrical wiring. Universal connectors like MC4 can be used in the entire wiring process because they can be connected to every solar panel. Apart from this, the wiring can be done in the following sequence:
- Series connection: Positive (+) connection connected with the negative (-) with the socket makes the connection successful. This also improves the voltage match with the battery tank.
- Parallel connection: In this form, positive (+), negative (-), and neutral (+) are connected in parallel.
Step 4. Connect the system to the solar inverter.
The equipment must then be connected to a solar inverter. The positive wire from the solar panel is linked to the inverter's positive electrode, while the negative wire is attached to the inverter's negative terminal. To produce power, the solar inverter is connected to the solar battery and grid.
If you want a highly efficient residential solar panel installation procedure, you can get in touch with the professionals of Quicken Solar.
Step 5. Connect solar inverter and battery
The solar inverter and solar battery must then be connected. The positive terminal of the battery is linked to the positive terminal of the inverter, and the negative terminal is connected to the negative terminal of the inverter. To store the electrical backup in an off-grid solar system, a battery is required.
Step 6. Connect the solar inverter to the grid.
The inverter must be attached to the power socket. A standard plug is utilized to connect to the main power switchboard for this connectivity. The electric board that delivers power to the dwelling is linked to an output wire.
Step 7. Start the solar inverter
When all the electrical cabling and attachments are completed, turn on the inverter switch on the home's main switch. Most solar inverters contain a digital display that will show you statistics about your solar unit's generation and use.
Follow Us on social media:
