Half-wet material crusher:The target moisture content of the organic fertilizer pulverizer for semi-wet materials is 30%, and the pulverization effect of 60% wet materials is particularly remarkable, such as animal manure, urban sludge, biogas residue, kelp residue, etc. The semi-wet material organic fertilizer pulverizer adopts a high-alloy wear-resistant hammer, and the forgings are particularly strong and wear-resistant, which is stronger and wear-resistant than ordinary hammers, which improves the service life of the hammer. The semi-wet material crusher adopts two-way gap adjustment technology, if the hammer is worn out, no repair is required, and the position of the movable hammer can continue to be used. In the organic fertilizer npk fertilizer manufacturing process, the particle size of the material can be controlled by adjusting the gap between the hammer and the liner.
Vertical crusher and double shaft chain crusher:
In the organic fertilizer npk production line, it has a strong applicability to the moisture of the material. In this area, the material with a moisture content of 50% can be crushed, and it is also suitable for fertilizer, building materials and other industries. In the fertilizer processing industry, it is ideal for humus, soil lumps, dead branches, fruit shells, bacterial residues, etc. to be pulverized, and a large amount of material is stored in areas rich in humus. These two machines are used in organic fertilizer plants,utilization is also high.
Organic fertilizer pulverizers can be divided into horizontal pulverizers and vertical pulverizers. It is widely used in bio organic fertilizer production. The main raw materials for crushing are livestock and poultry manure, domestic waste, biogas residue, fungus residue, etc. For materials with high water content, there are also machines with good crushing effect, especially farmyard manure, whose water content is often as high as 50%. It is ideal to use organic fertilizer high-humidity material pulverizer to pulverize. For other materials with low water content, chain pulverizers and cage pulverizers can be used. The straw pulverizer can be used for the pulverization of long materials.
The potassium fertilizer is fed into the disc granulator, so that the material gradually piles up by itself until it reaches the required particle size.
Since water will be added to the disc during granulation, additional drying process is required for the fertilizer production line when using this method of rolling raw materials into balls.Advantages and disadvantages of potash fertilizer granulation1.
The granulation of potash fertilizer has many advantages.
This non pressure agglomeration technology can produce particles with smaller density, so that the particles can decompose rapidly.
Because most of the potash fertilizer can be used as fertilizer after processing, the ability to decompose and provide nutrition faster is the inducement to choose potash fertilizer particles.
The round granular potash fertilizer is also easy to handle, and the fineness of potash fertilizer is lower than that of compacted particles.2.
Organic fertilizer is a popular fertilizer product in the agricultural market.
What equipment is needed for the organic fertilizer production process?Poultry manure organic fertilizer manufacturing process1.
The recovered chicken manure, sheep manure and cattle manure are directly sent to the fermentation area.2.
Poultry manure is piled after primary fermentation and secondary aging to eliminate the odor of livestock manure.
Fermentation bacteria can be added at this stage to decompose the crude fiber so that the particle size after pulverization meets the particle size requirements of granulation production.3.
Crush the fermented materials that have completed the secondary aging and stacking process and enter the mixing and stirring system.
