Advantages of SS 316L Tube Fittings

Sachiya Steel International is one of the Leading Manufacturer And Exporter for Stainless Steel 316 Tube to Male Fittings, where minimum values of toughness are specified for different applications.

Stainless Steel 316 Tube Fittings is possible for the magnetic permeability of austenitic steels to be changed during processing.

For example, cold work and welding of Stainless Steel 316L Tube Fittings are liable to increase the amount of martensite and ferrite respectively in the steel.

A familiar example of Stainless Steel 316 Compression Fittings is in a sink where the flat drainer has little magnetic response whereas the pressed bowl has a higher response due to the formation of martensite particularly in the corners.In practical terms, Stainless Steel 316L Compression Fittings are used for “non-magnetic” applications, for example magnetic resonance imaging (MRI).

Stainless Steel 316 Male Run Tee are extensively used for service down to as low as liquid helium temperature (-269 degree C).

Stainless Steel 316L Male Connector Fittings is largely due to the lack of a clearly defined transition from ductile to brittle fracture in impact toughness testing.Toughness of SS 316 Ferrule Fittings is measured by impacting a small sample with a swinging hammer, where the distance which the hammer swings after impact is a measure of the toughness.

Sachiya Steel International is one of the Leading Manufacturer And Exporter of Nickel 200 Tube to Male Fittings, which has some outstanding quality of attributes such as durable, fine finish, dimensionally constant, and so on.

These Nickel 200 Tube Fittings (UNS N02200) has a low annealed rigidity and very low work – toughening rate that is needed for cold establishing processes such as spinning, coining, deep drawing, and so on.

For the reason that the alloy shows excellent corrosion resistance, our Nickel 200 Compression Fittings has been used in caustic solution, food handling machinery, all – purpose corrosion – resistant components and constructions.These Nickel 200 Male Connector Fittings provide corrosion resistance in neutral and reducing media along with in oxidizing environments offered that the oxidizing media permits the establishment of an unreceptive oxide film.

Meanwhile, our Nickel 200 Compression Tube Fittings are as well being offered in different sizes and shapes to our customers.

These Nickel 200 Ferrule Fittings has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.Sachiya Steel International is one of the pioneer stockiest and trader of our quality Nickel 200 Double Ferrule Fittings, which are often required in complex applications, where corrosion and thermal resistance are demanded.

These Alloy 200 Male Connector Fittings are nickel and chromium alloys, as well as nickel and molybdenum alloys with high – temperature resistant properties.Nickel 200 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Nickel Alloy 200 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiNickel 2000.15 max0.35 max0.35 max0.01 max0.25 max0.40 max99.0 min                                           Nickel 200 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationNickel 2008.9 g/cm31446 °C (2635 °F)Psi – 67000 , MPa – 462Psi – 21500 , MPa – 14845 %       Equivalent Grades for 200 Nickel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENNickel 2002.4066N02200NW 2200NA 11НП-2N-100MNi 99.2 Alloy 200 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.

Sachiya Steel International is one of Leading Manufacture And Exporter for Stainless Steel 316 Tube to Union Fittings, which are more common in long products than in sheet and plate form.

Stainless Steel 316 Tube Fittings have generally low weldability and formability, which gives them a higher strength than either ferritic or austenitic steels.

Stainless Steel 316 Compression Fittings are resistant to stress corrosion cracking, which are further weldable but need care in selection of welding consumables and heat input.

Stainless Steel 316 Union Tube Fittings are formulated to have comparable corrosion resistance to standard austenitic steels but with enhanced strength and resistance to stress corrosion cracking.

SS 316L Tube Fittings have moderate formability and are magnetic but not so much as the ferritic, martensitic and PH grades due to the 50 % austenitic phase.

SS 316L Compression Fittings can develop very high strength by adding elements such as Copper, Niobium and Aluminum to the steel.

SS tube fittings are a versatile material made up of a steel alloy and a small percentage of chromium.

The chromium boosts the material's corrosion resistance, which is how it got its name.

Sachiya Steel International is Leading Manufacturer And Exporter of Copper Tube to Male Fittings, which is available in different shapes, sizes and designs as per requirements given by the clients.

These Copper Tube Fittings is a chemical element in the carbon group, where it is a soft and malleable metal and is regarded as both heavy metal and poor metal.

Our firm specializes in trading and supplying a quality array of Copper Compression Tube to Male Fittings, which is offered at market leading prices.

We are one of the distinguished organizations that are engaged in manufacturing, supplying and exporting a qualitative gamut of these Copper Male Connector Fittings, which are available in different sizes and shapes for our clients.With the help of our procurement agents, we have been able to trade and supply a comprehensive assortment of our Copper Ferrule Tube to Male Fittings, which are available in customized sizes and shapes for our patrons.

These Copper Double Ferrule Tube to Male Fittings is designed by the skilled professionals with the help of progressive technology and using quality approved components as per the set industry standards.Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male Fittings | Copper Tube to Male FittingsNew technologies like laser welding are used to manufacture our advanced Copper Compression Tube Fittings as they are of superior quality and more.

Our company has achieved a milestone in offering these Copper Male Connector Tube Fittings to the clients, which are extruded, cold drawn & annealedCopper Tube to Male Pipes Fittings SpecificationsSpecifications:ASTM B280 ASME SB280 / ASTM B68 ASME SB68Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Copper, 300/1000/3000PSICopper Tube to Male Pipes Fitting Chemical CompositionStandardCopper NO.Chemical CompositionMechanical PropertiesCU%P%TemperTensile strength (Mpa)Elongation (%)Average Grain Size (mm)ASTMB280/68C12200>99.90.015 to 0.040>60>205>40>0.040>50>245Copper Tube to Male Pipes Fittings Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.