When you set up a printer, there will be specific things that you should know about them so it would be great if you know more about it. It would be great if you try and figure out about how you would go around setting up hp envy so that you would have no problems with it at all. In order to do that, you would need to look at some of the basic things about it and this would include things that are actually very obvious but you might not properly figure out unless you actually read about them to get to know them better. Here are some of the things that you should keep in mind.
Movement
One of the things that you ought to know about it is the fact that you should not move it a lot because it is not designed to handle a lot of movement. It would be good to keep it as still as possible when you are setting it up so that you would not damage it or that you will not be having any problems with it in the long run. It would be good to know or make it possible to keep things as great as you want them to be. It would be nice if you can make sure that you are going to avoid any sudden movement of the printer.
Internal packaging
Another thing that you should keep in mind is the internal packaging, you should make sure it is well intact so that you can be sure that it is still as secure as possible. The printer packaging is very important to know the state of the printer and if this is secure, then most likely, your printer would not give you any trouble when you are in the process of setting it up and that is why you ought to make sure to be able to properly assess this.
Cartridges
The next thing that you need to check on would be the cartridges and to make sure that they are still working and that they do not have the ink dried out. This is something you can easily do by making sure that you install them once you turn on your printer so that you can ensure that you will not be having any misalignment of your inks and your cartridges.
Idle status
You should also keep in mind that the default of your printer is idle status so you should make sure that you know that and ensure to run some printing tests to make sure it will be working as well as you want it to be at the very least of it.