Sachiya Steel International is well-known amongst the customers for providing a quality approved collection of Nickel 200 Plate and Coils to the respected patrons. Nickel 200 Sheets (UNS N02200) has a low annealed rigidity and extremely low work – toughening rate. Nickel 200 Plates is used in food handling machinery, general corrosion – resistant structures and parts, caustic solutions, etc.
Nickel 200 Coils is chosen with beyond 315 Degree C, for the reason that of its enhanced resistance to “creep.” Nickel 200 Slatting Coils is ferromagnetic and has comparatively low electrical resistivity, which consists of low carbon version of the alloy. By means of Nickel 200 Perforated Coils, the limitations of both alloys are merged into a solitary dual chemistry that outcomes in a distinct alloy by means of the finest features of both.
Nickel 200 Plate | Nickel 200 Plate | Nickel 200 Plate | Nickel 200 Plate | Nickel 200 Plate | Nickel 200 Plate
Meanwhile, these Alloy 200 Sheets are also being offered in different sizes and shapes to our customers. Alloy 200 Plates is combined with higher creep properties at temperature and unsullied to form incredibly powerful and ductile. The unsullied of Alloy 200 Coils has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift.
The high metal and nickel contents of Alloy 200 Slatting Coils offer comparable corrosion resistance, superior resistance to oxidization. Therefore the retention of Alloy 200 Perforated Coils has a bigger fraction of temperature strength than the common solid solution alloys like 304.
Nickel 200 Sheet, Plate & Coil Specifications |
||
| Specifications | : | ASTM / ASME SB 168 |
| Size | : | 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm |
| Thickness | : | 0.1mm to 12 mm Thk |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange) |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated) |
| Hardness | : | Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc. |
Nickel 200 Plate, Sheet & Coil Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 200 | 0.15 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
Nickel 200 Sheets, Plates & Coils Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 200 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
Equivalent Grades for 200 Nickel Sheets & Plates
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 200 | 2.4066 | N02200 | NW 2200 | NA 11 | НП-2 | N-100M | Ni 99.2 |
Nickel 200 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the well-established stockiest and trader of quality Nickel Alloy 201 Plate , Sheets, Coils, which resists attack from phosphoric acid and have been successfully used with nitric acid.
These Nickel 201 Plates is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures.Our Nickel 201 Coils exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.
Like steel, these Nickel 201 Slating Coils is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper.Nickel Alloy 201 Plate | Nickel Alloy 201 Plate | Nickel Alloy 201 Plate | Nickel Alloy 201 Plate | Nickel Alloy 201 Plate | Nickel Alloy 201 Plate | Nickel Alloy 201 Plate | Nickel Alloy 201 Plate | Nickel Alloy 201 PlateOther metals in contact with our Nickel 201 Perforated Coils, particularly in a damp or acidic environment, may suffer galvanic corrosion even though the stainless metal may be unaffected.
These Alloy 201 Sheets is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel.Our Alloy 201 Plates is resistant to sulphuric acid at room temperature, even in high concentrations.
These Alloy 201 Coils are both useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect steel under such conditions), though it provides the greatest level of resistance to corrosion.
Nickel 201 Sheet, Plate & Coil SpecificationsSpecifications:ASTM / ASME SB 162Size:1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mmThickness:0.1mm to 12 mm ThkForm:Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip, Flats, Blank (Circle), Ring (Flange)Finish:Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)Hardness:Soft, Hard, Half Hard, Quarter Hard, Spring Hard etc.
Sachiya Steel International is a Leading Manufacture And Exporter of Titanium Gr 5 Wire, which is alloyed with 6 % Aluminum and 4 % Vanadium.
Features of Titanium Grade 5 Wire and its applications are used in in different fields, from motor sport to aerospace, naval and industrial.
In the majority of these and other engineering applications, Titanium Grade 5 Coil Wire has replaced heavier, less serviceable or less cost effective materials.
Titanium Grade 5 Wire is the common high strength, light weight alloy used for different applications.Like most titanium alloys, Titanium Grade 5 Electrode has outstanding resistance to corrosion in most natural and many industrial process environments.
Grade 5 Titanium Wire is alloyed with aluminum, manganese, iron, molybdenum and other metals to increase strength, to withstand high temperatures, and to lighten the resultant alloy.
Grade 5 Titanium Coil Wire is often used in pressure vessels; rocket engine cases; helicopter rotor hubs; fasteners; critical forgings requiring high strength-to-weight ratios.Grade 5 Titanium Welding Wire is an aerospace alloy that will have ultimate tensile strength at and above 120,000 psi, where it further accounts for 50 percent of total titanium usage the world over.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 304H Round Bar, which is a nickel – molybdenum – chromium super – alloy with an addition of tungsten designed to have excellent corrosion resistance in a wide range of severe environments.
Stainless Steel 304H Square Bars has outstanding high-temperature stability, and has excellent resistance to stress-corrosion cracking and oxidizing atmospheres up to 1040 Degree C. Stainless Steel 304H Flat Bars has exceptional resistance to a wide variety of chemical process environments, including hot contaminated mineral acids, solvents, chlorine and chlorine contaminated media (organic and inorganic), formic and acetic acids, acetic anhydride, and seawater and brine solutions.The high nickel and molybdenum contents make Stainless Steel 304H Threaded Bars especially resistant to pitting and crevice corrosion in reducing environments while chromium conveys resistance to oxidizing media.
The carbon content in Stainless Steel 304H Hollow Bars minimizes carbide precipitation during welding to maintain corrosion resistance in as – welded structures.
Stainless Steel 304H Hexagonal Bars is resistant to the formation of grain boundary precipitates in the weld heat – affected zone, thus making it suitable for most chemical process application in an as welded condition.Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round Bar | Stainless Steel 304H Round BarAlthough there are several variations, Stainless Steel 304H Triangular Bars is by far the most widely used.
SS 304H Bars is widely used in the most severe environments such as chemical processing, pollution control, pulp and paper production, industrial and municipal waste treatment, and recovery of sour natural gas.SS 304H Round Bar SpecificationsSpecifications:ASTM A276, ASME SA276 / ASTM A479 ASME SA479Dimensions:EN, DIN, JIS, ASTM, BS, ASME, AISISS 304H Round Bars:Outside Diameter in the range of 4mm to 500mmSS 304H Bright Bars:Outside Diameter in the range of 4mm to 100mmSS 304H Hex Bars:18mm – 57mm (11/16″ to 2-3/4″)SS 304H Square Bars:18mm – 47mm (11/16″ to 1-3/4″)SS 304H Flat Bars:1/2” to 10” in thickness range of 2mm to 150mm,Finish:Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA FinishLength:1 to 6 Meters, Custom Cut LengthsForm:Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc.304H Stainless Steel Round Bar Chemical CompositionGradeCMnSiPSCrMoNiNSS 304H0.10 max2 max0.75 max0.045 max0.030 max18 – 20–8 – 10.5–Stainless Steel 304H Rods Mechanical PropertiesDensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation8.0 g/cm31400 °C (2550 °F)Psi – 75000 , MPa – 515Psi – 30000 , MPa – 20540 %Equivalent Grades for 304H Stainless Steel Round BarSTANDARDWERKSTOFF NR.UNSSS 304H1.4301S30409 SS 304H Round Bar Application IndustriesOff-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper IndustryAbout Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International is one of the leading Manufacturer And Exporter of Inconel 718 Threaded Forged Fittings to the clients, which are tested for its quality before being introduced in the market.
Inconel 718 Forged Threaded Elbow (UNS N07718) also exhibits excellent tensile and impact strength.
Inconel 718 Forged Threaded Tee has better mechanical properties at lower temperatures than Nimonic 90 Forged Fittings and Inconel X – 750 Forged Threaded Fittings.
Inconel 718 Forged Threaded Cross has been used for jet engine and high – speed airframe parts such as wheels, buckets, spacers, and high temperature bolts and fasteners.
Inconel 718 Forged Threaded Cap is also used in gas turbines, rocket motors, spacecraft, nuclear reactors, pumps, and tooling.Inconel 718 Forged Threaded Fittings has excellent weldability compared to the nickel – base super alloys hardened by Aluminum and Titanium.
Meanwhile, these Inconel 718 Forged Threaded Coupling are also being offered in different sizes and shapes to our customers.
Sachiya Steel International is one of the Leading Manufacturer And Exporter high quality Stainless Steel 310 Threaded Forged Fittings, which are reduced to iron, also called hot metal or pig iron.
After casting and rolling, Stainless Steel 310 Forged Threaded Elbow is delivered as coil, plate, sections or bars.
Stainless Steel 310S Forged Threaded Tee made in fine quality uses electricity to melt recycled steel.
Additives, such as Stainless Steel 310 Forged Threaded Cross are used to adjust to the desired chemical composition.Electrical energy in Stainless Steel 310S Forged Threaded Cap can be supplemented with oxygen injected into the EAF.
Another steelmaking technology, the open hearth furnace (OHF), makes up about 0.4 % of Stainless Steel 310 Forged Threaded production.
The OHF process of Stainless Steel 310S Forged Threaded Coupling is very energy intensive and is in decline owing to its environmental and economic disadvantages.
Ninthore Overseas is one of the Leading Manufacturer And Exporter Of high quality Stainless Steel 310 Flanges , where the heat treatment is given on the continuously rolling hearth furnace and the furnace is fitted with temperature recorders and controllers.
After the heat treatment process, Stainless Steel 310 Slip On Flanges and pipes are straightened and subjected to pickling for removing scales from the surface.
In some cases, the required size of Stainless Steel 310S Threaded Flanges may not be obtained from the mill directly, so then the cold operation process can be used to obtain the desired size.In cold drawing process, Stainless Steel 310S Weld Neck Flanges are coated with oxalic and soap solution.
This solution in Stainless Steel 310S Blind Flanges acts as a lubricant to reduce friction while cold drawing operation.
In the cold drawing process, Stainless Steel UNS S31000 / S31008 Socket Weld Flanges is drawn over the bench using die plugs.
The drawn – out Stainless Steel 310S Lap Joint Flanges is then subjected to cleaning, heat treatment, pickling and straightening.Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 Flanges | Stainless Steel 310 FlangesStainless Steel 310 Ring Joint Type Flanges is marked with grade of material, size, heat number and the stamp of third party inspection before passing on to stainless steel pipe exporters.
