Sachiya Steel International is a recognized trader and supplier of ASTM A515 Gr 60 Plates ,Sheets ,Coils, where examples of its applications are lock wire, exhaust liners and turbine seals. Iron base high temperature alloy such as ASTM A515 Gr. 60 Carbon Steel Plates using temperature normally only up to 750 Degree D – 780 Degree C, in the higher temperature of the heat used parts, used the nickel and refractory metal.
Laboratory tests of ASME SA 515 Gr. 60 Carbon Steel Coils at 200 Degree C (390 Degree F) in contaminated 95 % super phosphoric acid gave the following corrosion rates. Light forming of ASTM A515 Gr. 60 Carbon Steel Slating Coils can be done at temperatures down to 1600 Degree F (870 Degree C). Above about 20 % sulphuric acid, ASME SA 515 Gr. 60 Carbon Steel Perforated Coils is even more resistant than stainless steel. The behavior of ASTM A515 Gr. 60 CS Plates during cold forming is similar to that of other alloys.
ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates | ASTM A515 Gr 60 Plates
The usual annealing temperature of ASME SA 515 Gr. 60 CS Coils is approximately 1900 Degree F (1040 Degree C). In the aeronautical field, ASTM A515 Gr. 60 CS Slating Coils is used for a variety of engine and airframe components which must withstand high temperatures. In various types of high – temperature water, ASME SA 515 Gr. 60 CS Perforated Coils displays low corrosion rates and excellent resistance to stress – corrosion cracking.
ASTM A515 Grade 60 Plates Specifications |
||
| Specifications | : | ASTM A515 |
| Thickness | : | 8-100mm |
| Width |
: | 1500-3500mm |
| Length |
: | 3000-8000mm |
| Surface | : | 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sand blast, Brush, etching, etc |
| Finish | : | Hot rolled plate (HR), Cold rolled sheet (CR) |
| Form | : | Coils, Foils, Rolls, Plain Sheet, Shim Sheet, Strip etc. |
ASTM A515 Grade 60 Plates Chemical Composition
| Grade | C | Mn | P | S | Si |
| A515 Grade 60 | 0.24-0.31 | 0.98 max | 0.035 max | 0.035 max | 0.13-0.45 |
ASTM A515 Grade 60 Sheets, Plates Mechanical Properties
| Grade | Thickness | Yield | Tensile | Elongation |
| A515 Grade 60 | 50-200mm | MPa -220 min | MPa – 415-550 | 21-25% |
ASTM A515 Grade 60 Sheets, Plate & Coils Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 410 Tube to Union Fittings, which represent an excellent combination of corrosion resistance and fabricability.
These Stainless Steel 410 Tube Fittings is austenitic chromium – nickel stainless steel, non – harden able by thermal treatments.
Stainless Steel 410 Compression Fittings may be cold worked to high tensile strengths with slightly lower.
These Stainless Steel 410 Union Tube Fittings is the most widely used of the austenitic (chromium / nickel) stainless steels.In the annealed condition, Stainless Steel 410 Ferrule Fittings is essentially non – magnetic and becomes slightly magnetic with the application of cold work.
These Stainless Steel 410 Double Ferrule Fittings is preferred in welding applications to exclude the formation of chromium carbides during cooling in the heat affected region of the weld.
Heat these 410 Stainless Steel Union Fittings up to 1850 Degree F to 2050 Degree F and cool at sufficiently high rates through 1500 Degree F to 800 Degree F to avoid precipitation of chromium carbides.Stainless Steel 410 Tube to Union Fittings | Stainless Steel 410 Tube to Union Fittings | Stainless Steel 410 Tube to Union Fittings | Stainless Steel 410 Tube to Union Fittings | Stainless Steel 410 Tube to Union Fittings | Stainless Steel 410 Tube to Union Fittings | Stainless Steel 410 Tube to Union Fittings | Stainless Steel 410 Tube to Union FittingsFor Stress Relief Annealing of these 410 Stainless Steel Tube Fittings, cold worked parts should be stress relieved at 750 Degree F for half-an-hour to two hours.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality Nickel 201 Tube to Male Fittings, which is the higher carbon version of the alloy.
Nickel 201 Tube Fittings has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments.
Nickel 201 Compression Fittings is also advantageous for high temperature service because of its good mechanical properties.
Nickel 201 Male Connector Fittings offers higher creep and stress rupture properties than Alloy 304.
Nickel 201 Ferrule Fittings particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns.Nickel 201 Double Ferrule Fittings is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 / 8 type alloy with improved inter – granular – corrosion resistance.
Ni 201 Tube Fittings has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male FittingsNi 201 Compression Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality Nickel 201 Tube to Male Fittings, which is the higher carbon version of the alloy.
Nickel 201 Tube Fittings has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments.
Nickel 201 Compression Fittings is also advantageous for high temperature service because of its good mechanical properties.
Nickel 201 Male Connector Fittings offers higher creep and stress rupture properties than Alloy 304.
Nickel 201 Ferrule Fittings particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns.Nickel 201 Double Ferrule Fittings is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 / 8 type alloy with improved inter – granular – corrosion resistance.
Ni 201 Tube Fittings has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.Ni 201 Compression Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
Sachiya Steel International is one of the pioneer Manufacture and Exporter of Stainless Steel 410 Tube to Female Pipes, which is the higher carbon version of the alloy.
These Stainless Steel 410 Tube Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
In most instances, the carbon content of Stainless Steel 410 Compression Fittings enables dual certification.
These Stainless Steel 410 Female Connector Fittings cannot be hardened by heat treatment, only by cold working.Stainless Steel 410 Ferrule Fittings can be easily welded and processed by standard shop fabrication practices.
These Stainless Steel 410 Double Ferrule Fittings can be used in nitric solutions and also in most diluted organic acids at moderate temperatures.
SS 410 Tube Fittings used in pure phosphoric acid at lower temperatures and up to 10 % diluted solutions at elevated temperatures.
Sachiya Steel International is a leading manufacturer and exporter of Stainless Steel 321 Tube to Male Fittings, which is available at best price.
Stainless Steel 321 Tube Fittings has increased resistance to scaling and intergranular corrosion (versus 304 / 316 material) due mainly to its added titanium content.
Titanium addition in Stainless Steel 321H Tube Fittings eliminates the formation of chromium carbides at the grain boundaries by tying up the carbon and nitrogen as titanium carbides or nitrides.
While processing only stainless tools like steel brushes in Stainless Steel 321 Compression Tube Fittings, pneumatic picks and so on are allowed, in order to not endanger the passivation.Stainless Steel 321H Compression Tube Fittings is similar to stainless steel 304, but with higher nickel content and stabilized with titanium.
Welding should be carried out using Stainless Steel 321 Male Connector Fittings or similar electrodes or rods (depending upon application), where no pre heat or post heat is generally required.Stainless Steel 321H Male Connector Fittings is subject to pitting and crevice corrosion in warm chloride environments, and to stress corrosion cracking above about 60 °C.
Stainless Steel 321H Ferrule Fittings can be used in up to 10 % diluted solutions at elevated temperatures.
