Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality Nickel 201 Tube to Male Fittings, which is the higher carbon version of the alloy. Nickel 201 Tube Fittings has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments. Nickel 201 Compression Fittings is also advantageous for high temperature service because of its good mechanical properties. Nickel 201 Male Connector Fittings offers higher creep and stress rupture properties than Alloy 304. Nickel 201 Ferrule Fittings particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns.
Nickel 201 Double Ferrule Fittings is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 / 8 type alloy with improved inter – granular – corrosion resistance. Ni 201 Tube Fittings has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.
Ni 201 Compression Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C). In most instances, the carbon content of Ni 201 Male Connector Fittings enables dual certification. Ni 201 Ferrule Fittings does not perform well in chloride solutions, even in small concentrations, or in sulphuric acid. Ni 201 Double Ferrule Fittings cannot be hardened by heat treatment, only by cold working.
|
Nickel 201 Tube to Male Fittings Specifications
|
||
| Specifications | : | ASTM B366 ASME SB366 |
| Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
| Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Brass | : | ASTM B16 ASTM B 453 |
| Pressure Rating | : | 6000PSI for Nickel, 300/1000/3000PSI for Brass |
| Grade | C | Mn | Si | S | Cu | Fe | Ni |
| Nickel 201 | 0.02 max | 0.35 max | 0.35 max | 0.01 max | 0.25 max | 0.40 max | 99.0 min |
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| Nickel 201 | 8.9 g/cm3 | 1446 °C (2635 °F) | Psi – 67000 , MPa – 462 | Psi – 21500 , MPa – 148 | 45 % |
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| Nickel 201 | 2.4068 | N02201 | NW 2201 | NA 12 | НП-2 | – | LC-Ni 99 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Sachiya Steel International
Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality Nickel 201 Tube to Male Fittings, which is the higher carbon version of the alloy.
Nickel 201 Tube Fittings has slightly improved corrosion resistance over stainless steel in strongly oxidizing environments.
Nickel 201 Compression Fittings is also advantageous for high temperature service because of its good mechanical properties.
Nickel 201 Male Connector Fittings offers higher creep and stress rupture properties than Alloy 304.
Nickel 201 Ferrule Fittings particularly might also be considered for exposures where sensitization and inter – granular corrosion are concerns.Nickel 201 Double Ferrule Fittings is a columbium (niobium) / tantalum stabilized austenitic chromium – nickel stainless steel which was developed to provide an 18 / 8 type alloy with improved inter – granular – corrosion resistance.
Ni 201 Tube Fittings has a slightly improved corrosion resistance over other alloys of stainless steel in strongly oxidizing environments as a result of the addition of columbium (niobium) and tantalum.Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male Fittings | Nickel 201 Tube to Male FittingsNi 201 Compression Fittings was developed for enhanced creep resistance and for higher strength at temperatures above 1000 Degree F (537 Degree C).
Sachiya Steel International is one of the well-established Manufacture and Exporter of quality Nickel Alloy 201 Tube to Female Pipes, which consists of low carbon version of the alloy.
Nickel 201 Tube Fittings is associate solid solution heat resistant alloy with wonderful resistance to oxidization underneath gently cyclic conditions through 2000 Degree F. Nickel 201 Compression Fittings is quickly fancied by commonplace industrial procedures.
Nickel 201 Female Connector Fittings is compared to steel and unsullied steels that are harder and have a tendency to figure harden speedily.Nickel 201 Ferrule Tube Fittings is a heat resisting steel with high resistance to oxidization scaling and has high strength at elevated temperatures.
Nickel 201 Double Ferrule Tube Fittings may be welded victimization all of the common attachment processes.
Alloy 201 Compression Tube Fittings is combined with higher creep properties at temperature and unsullied which is incredibly powerful and ductile.
The unsullied of Ni 201 Female Connector Fittings has smart resistance to oxidization and will be employed in continuous service up to 1140 Degree C provided reducing Sulphur gases don’t seem to be gift.Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female Pipes | Nickel Alloy 201 Tube to Female PipesWith its high metal content, Nickel 201 Tube Fittings offers smart corrosion resistance to extend warmth properties.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of quality Nickel Alloy 201 Tube to Union Fittings, which is ferromagnetic.
Our Nickel 201 Tube Fittings are solid solution strengthened, commercially pure wrought materials by means of good mechanical properties over a wide range of temperatures and excellent resistance to many corrosives, in particular hydroxides.
These Nickel 201 Compression Fittings provides high thermal and electrical conductivity in comparison to nickel – base alloys, stainless and low alloy steels.
Our Nickel 201 Union Fittings is not recommended for service above 600 Degree F (316 Degree C) because long – time exposures in the 800 Degree F to 1200 Degree F range result in precipitation of a carbon containing phase and loss of ductility.These Nickel 201 Ferrule Fittings is a modification of Nickel 200 to control carbon which keeps it from being embrittled by inter – granular precipitates at temperatures of 600 Degree F to 1400 Degree F in many processes.
Our Nickel 201 Double Ferrule Fittings also has a high Curie temperature and good magneto strictive properties.
These annealed Alloy 201 Tube Fittings has a low hardness and good ductility and malleability.Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union Fittings | Nickel Alloy 201 Tube to Union FittingsThese attributes, combined with good weldability, make our Alloy 201 Compression Fittings highly fabricable.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Nickel 200 Tube to Male Fittings, which has some outstanding quality of attributes such as durable, fine finish, dimensionally constant, and so on.
These Nickel 200 Tube Fittings (UNS N02200) has a low annealed rigidity and very low work – toughening rate that is needed for cold establishing processes such as spinning, coining, deep drawing, and so on.
For the reason that the alloy shows excellent corrosion resistance, our Nickel 200 Compression Fittings has been used in caustic solution, food handling machinery, all – purpose corrosion – resistant components and constructions.These Nickel 200 Male Connector Fittings provide corrosion resistance in neutral and reducing media along with in oxidizing environments offered that the oxidizing media permits the establishment of an unreceptive oxide film.
Meanwhile, our Nickel 200 Compression Tube Fittings are as well being offered in different sizes and shapes to our customers.
These Nickel 200 Ferrule Fittings has a relatively low work – hardening rate, but it can be cold worked to moderately high strength levels while maintaining ductility.Sachiya Steel International is one of the pioneer stockiest and trader of our quality Nickel 200 Double Ferrule Fittings, which are often required in complex applications, where corrosion and thermal resistance are demanded.
These Alloy 200 Male Connector Fittings are nickel and chromium alloys, as well as nickel and molybdenum alloys with high – temperature resistant properties.Nickel 200 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Nickel Alloy 200 Tube To Male Fittings Chemical Composition GradeCMnSiSCuFeNiNickel 2000.15 max0.35 max0.35 max0.01 max0.25 max0.40 max99.0 min Nickel 200 Tube To Male Fittings Mechanical PropertiesElementDensityMelting PointTensile StrengthYield Strength (0.2%Offset)ElongationNickel 2008.9 g/cm31446 °C (2635 °F)Psi – 67000 , MPa – 462Psi – 21500 , MPa – 14845 % Equivalent Grades for 200 Nickel Ferrule Fitting Tube To Male FittingsSTANDARDWERKSTOFF NR.UNSJISBSGOSTAFNORENNickel 2002.4066N02200NW 2200NA 11НП-2N-100MNi 99.2 Alloy 200 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Cupro Nickel 70 Tube to Male Fittings, which contain a unique summary of data relating to the physical and mechanical properties of the materials and low, ambient and elevated temperatures which is not available elsewhere.
The alloying elements in Copper Nickel 70 / 30 Tube Fittings do not get homogenized even by repeated thermal and mechanical treatments.
Available in various sizes, thicknesses and specifications, Copper Nickel 70 / 30 Compression Fittings are largely used in various industries.Copper Nickel 70 / 30 Male Connector Fittings are amongst the most necessary materials needed to provide the means to keep homes, commerce and industry running.
Backed by latest technologies and dexterous workforce, we are able to manufacture, supply and export an impeccable gamut of Copper Nickel 70 / 30 Ferrule Fittings, which is also available in customized sizes and shapes for our esteemed clients.We are one of the leading manufacturers, exporters and suppliers of a premium quality assortment of Copper Nickel 70 / 30 Double Ferrule Fittings, is stronger than the more common copper nickel 70/30 and is able to withstand corrosion at higher velocities in marine applications, making it the favorable choice in submarine systems.
In desalination plants, Copper Nickel 70 / 30 Compression Tube Fittings are used in brine heaters, heat rejection and recovery, and in evaporator tubing.Cupro Nickel 70/30 Tube to Male Fittings SpecificationsSpecifications:ASTM B366 ASME SB366Tube Size:6mm to 38mm to 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Brass:ASTM B16 ASTM B 453Pressure Rating:6000PSI for Nickel, 300/1000/3000PSI for Brass Cu-Ni 70/30 Tube To Male Fittings Chemical Composition GradeCuMnPbNiFeZnCupro Nickel 70/3065 min1.0 max0.05 max29-33 max0.4-1.0 max1 max Cupro Nickel 70/30 Tube To Male Fittings Mechanical Properties DensityMelting PointTensile StrengthYield Strength (0.2%Offset)Elongation0.323 lb/in3 at 68 F2260 F50000 psi20000 psi30 % Equivalent Grades for 70/30 Cupro Nickel Ferrule Fitting Tube To Male Fittings STANDARDWERKSTOFF NR.UNSCupro Nickel 70/302.0882C71500 Cu-Ni 70/30 Tube To Male Fittings Application Industries Off-Shore Oil Drilling CompaniesPower GenerationPetrochemicalsGas ProcessingSpecialty ChemicalsPharmaceuticalsPharmaceutical EquipmentChemical EquipmentSea Water EquipmentHeat ExchangersCondensersPulp and Paper Industry About Us: Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide.
We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.Email: [email protected] For More Information Visit Our Website: Sachiya Steel International
