Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Angle Other Products, which is stronger than Grade 1 and equally corrosion – resistant against most applications. Titanium Grade 2 Angle is least used of the commercially pure titanium grades, but that does not make it any less valuable. Titanium Grade 2 C-Channel can also be easily machined, hot worked and welded, where hot working should be performed between 400 Degree F and 600 Degree F.
Titanium Grade 2 Chain is not heat treatable, and is used for condensers & heat exchangers. Titanium Grade 2 I-Beam is an alpha – beta alloy, which has better response than Ti Grade 5 when heat treating to high strength levels. The oxide scale of Titanium Grade 2 H-Beam, in turn, presents a very good protective layer, preventing bulk from oxidation. The oxidized layer of Titanium Grade 2 T-Beam provides a better protection than the use of argon or high vacuum.
Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle | Titanium Gr 2 Angle |
Grade 2 Titanium Angle has physical and mechanical properties equivalent to CP3 titanium. The corrosion resistance of Grade 2 Titanium Chain is based on the presence of a stable, continuous, tightly adherent oxide layer. Grade 2 Titanium C-Channel also offers a higher strength – to – weight ratio and increased corrosion resistance compared to the stainless steel alloys, thus making it an attractive choice for medical applications. Grade 2 Titanium I-Beam possesses good weldability, strength, ductility and formability.
Titanium Grade 2 Angle, Channel, Beam, Chain Specifications |
||
| Specifications | : | ASTM B348 / ASME B348 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Titanium Gr 2 Angle |
: | 5mm to 9mm |
| Titanium Gr 2 Channel |
: | 40mm*20mm~300mm*300mm |
| Titanium Gr 2 Beam | : | 3″ thru 12.31″ |
| Titanium Gr 2 Chain |
: | 1/8 inch – 1/2 inch Diameter |
| Thickness |
: | 3.0mm – 120mm |
| Length | : | 3MTR, 4MTR, 5MTR, 6MTR, or Custom Cut Sizes |
| Type | : | Angle, C Channel, U Channel, H Beam, I Beam, T Beam, W Beam, Chain |
Grade 2 Titanium Angle, Channel, Beam, Chain Chemical Composition
| Grade | C | H | N | O | Ti | Fe |
| Titanium Grade 2 | 0.1 max | 0.015 max | 0.3 max | 0.025 max | 99.2 min | 0.3 max |
Titanium Gr 2 Angle, Channel, Beam, Chain Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 4.5 g/cm3 | 1665 °C (3030 °F) | Psi – 49900 , MPa – 344 | Psi – 39900 , MPa – 275 | 20 % |
Equivalent Grades for Grade 2 Titanium Angle, Channel, Beam, Chain
| STANDARD | WERKSTOFF NR. | UNS |
| Titanium Grade 2 | 3.7035 | R50400 |
Titanium Grade 2 Angle, Channel, Beam, Chain Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas ProceTitaniuming
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Angle And Other Titanium Products, which is stronger than Grade 1 and equally corrosion – resistant against most applications.
Titanium Grade 2 Angle is least used of the commercially pure titanium grades, but that does not make it any less valuable.
Titanium Grade 2 C-Channel can also be easily machined, hot worked and welded, where hot working should be performed between 400 Degree F and 600 Degree F. Titanium Grade 2 Chain is not heat treatable, and is used for condensers & heat exchangers.Titanium Grade 2 I-Beam is an alpha – beta alloy, which has better response than Ti Grade 5 when heat treating to high strength levels.
The oxide scale of Titanium Grade 2 H-Beam, in turn, presents a very good protective layer, preventing bulk from oxidation.
The oxidized layer of Titanium Grade 2 T-Beam provides a better protection than the use of argon or high vacuum.Grade 2 Titanium Angle has physical and mechanical properties equivalent to CP3 titanium.
The corrosion resistance of Grade 2 Titanium Chain is based on the presence of a stable, continuous, tightly adherent oxide layer.
Sachiya Steel International is a Leading manufacturer and exporter of Titanium Gr 2 Wire, which has a detrimental effect on ductility and its content kept as low as possible.
In the majority of these and other engineering applications, Titanium Grade 2 Wire has replaced heavier, less serviceable or less cost effective materials.
Titanium Grade 2 Coil Wire is the best among commercially pure titanium grades, where it is the softest and most ductile compared to grades.
Typical applications for Titanium Grade 2 Wire include chemical process, petroleum refining, biomedical as well as heat exchangers in an array of different applications.Titanium Grade 2 are light in weight, have extraordinary corrosion resistance and the ability to withstand extreme temperatures.
2 Filler Wire is higher in strength than CP Grade 1, but lower in strength than CP Grade 3 and CP Grade 4.
2 Electrode is used in aviation, aerospace, military, chemical, petrochemical industry, in the medical field, jewelry, calibration of measurement instruments, piercing purposes.Ti Gr.
Sachiya Steel International is a prominent manufacturer, trader and supplier of a vast collection of Titanium Gr 2 Round Bar.
Titanium Grade 2 Square Bars is the most generally used and extensively obtainable grade of unalloyed titanium.
These Titanium Grade 2 Flat Bars is characteristically used in applications that need higher corrosion resistance in different hostile media.Titanium Grade 2 Threaded Bars as well offers superior strength and formability between grades 1 and 3.
Titanium Grade 2 Hollow Bars provides soaring corrosion resistance and a better operational array than aluminum.
By means of outstanding corrosion resistance, formability and moderate strength, Titanium Grade 2 Hexagonal Bars signifies the most extensively used form of titanium.Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar | Titanium Gr 2 Round Bar| Titanium Gr 2 Round Bar | Titanium Gr 2 Round BarMeanwhile, Titanium Grade 2 Triangular Bars are also being offered in different sizes and shapes to our customers.
Titanium Grade 2 Bars has a minimum yield strength of 275 Mpa (40 ksi), and relatively low levels of impurity elements, which places it between Grades 1 and 3 in terms of strength.This is partly due to low density and corrosion resistance of Titanium Grade 2 Rods which can be easily welded, hot and cold worked and machined.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Wire Mesh, which are unalloyed Commercially Pure (CP) Titanium.
Our Titanium Grade 2 Hexagonal Wire Mesh is used based on the corrosion resistance, ductility and strength requirements of the specific application.
Titanium Grade 2 Welding Wire Mesh is called the “workhorse” of the commercially pure titanium industry, thanks to its varied usability and wide availability.
Although “commercially pure”, Titanium Grade 2 Spring Steel Wire Mesh has acceptable mechanical properties and has been used for orthopedic and dental implants.
For most applications, Titanium Grade 2 Fencing Wire Mesh is alloyed with small amounts of aluminum and vanadium, typically 6 % and 4 % respectively, by weight.Ti Alloy Gr.
2 Hexagonal Wire Mesh can easily be cold rolled, but cold drawing is very difficult because of frequent seizing on the die.
Sachiya Steel International is a known manufacturer and exporter of Titanium Gr 2 Tube to Female Pipes, which is alloyed with 6 % Aluminum and 4 % Vanadium.
Titanium Grade 2 Compression Fittings has good ductility, which allows for cold formability.
Hot roll, forge and hot press, initial roughing for Titanium Grade 2 Ferrule Fittings is done at 86 Degree F to 122 Degree F (30 Degree C to 50 Degree C) higher than beta transits, Finish from 1499 Degree F to 1652 Degree F (815 Degree C to 900 Degree C).This heat treatment process is carried out after Titanium Grade 2 Double Ferrule Fittings has been worked into its final shape but before it is put to use, allowing much easier fabrication of a high – strength product.
Annealing of Titanium Grade 2 Double Ferrule Fittings in air oxidizes the surface to a depth of 0.1 mm to 0.2 mm, depending on time and temperature of the treatment.
Titanium Grade 2 Female Connector Fittings may be considered in any application where formability and corrosion resistance are important, and strength requirements are moderate.We also boast an Accredited Testing Laboratory for Grade 2 Titanium Tube Fittings which is unique within the multi – metal and plastic stockholding sector.
Most of the applications of Grade 2 Titanium Compression Fittings are in the chemical industries, where the most common uses are reactor autoclaves, piping and fittings, valves, heat exchangers and condensers.Titanium Gr 2 Tube to Female Pipes SpecificationsSpecifications:ASTM B381 ASME SB 381Size:OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″Thread:NPT, BSP, BSPT, UNF, ISO, SAE etc.Pressure Rating:3000 – 4000 PSIApplicable Temperature:150-400 CType:Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting.
