Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304 Tube to Male Fittings, which does not perform well in more highly reducing environments such as those containing chlorides and sulphuric acid. The austenitic structure of our Stainless Steel 304 Tube Fittings also gives this grade excellent toughness, even down to cryogenic temperatures. These Stainless Steel 304 Compression Fittings can be easily welded and processed by standard shop fabrication practices. Our Stainless Steel 304 Ferrule Tube Fittings is the most common form of stainless steel used around the world, largely due to its excellent corrosion resistance and value.
These Stainless Steel 304 Double Ferrule Tube Fittings performs well in fresh water service by means of low levels of chlorides (less than 100 ppm). At higher chloride levels, our SS 304 Tube Fittings is susceptible to crevice corrosion and pitting. Working temperatures of these Stainless Steel 304 Male Connector Fittings is up to 1652 Degree F – 2102 Degree F (750 Degree C – 1150 Degree C) and are recommended for most hot working processes.
Our SS 304 Compression Fittings contains between 16 percent chromium and 24 percent chromium and up to 35 percent nickel — as well as small amounts of carbon and manganese. The slightly higher price point of these 304 Stainless Steel Male Connector Fittings is well worth it in areas with high chloride exposure, especially the coast and heavily salted roadways.
Stainless Steel 304 Tube to Male Fittings Specifications
|
||
Specifications | : | ASTM A276 ASME SA 479 |
Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Brass | : | ASTM B16 ASTM B 453 |
Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 304 | 0.08 max | 2 max | 0.75 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 11 | – |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304 | 1.4301 | S30400 | SUS 304 | 304S31 | 08Х18Н10 | Z7CN18‐09 | X5CrNi18-10 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Contact:
D-2, Office no. 3,
Gr. Floor, Bharat Nagar Society,
Grant Road (E), Mumbai - 400007
Tel: +91 9769056007
Email: [email protected]
Website: https://sachiyasteel.com/