Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304L Tube to Male Fittings, which is tougher than grade 304 stainless steel with a long stringy chip however, using chip breakers is recommended. Machining of our Stainless Steel 304L Tube Fittings requires low speeds and constant feeds to reduce its tendency to work harden. Welding of these Stainless Steel 304L Compression Fittings can be performed using most of the conventional fusion and resistance methods.
Oxyacetylene welding for our Stainless Steel 304L Compression Tube Fittings should be avoided, where filler metal is recommended. Conventional hot working processes can be performed, where these Stainless Steel 304L Male Connector Tube Fittings should be heated to 1149 Degree C – 1260 Degree C (2100 Degree C – 2300 Degree F); however, it should not be heated below 927 Degree C (1700 Degree F).
To optimize corrosion resistance, a post – work annealing of our SS 304L Tube Fittings is recommended. Shearing, stamping, heading and drawing are possible with these SS 304L Male Run Tee, and post – work annealing is recommended to eliminate internal stresses. Annealing of our SS 304L Male Connector Fittings is performed at 1010 Degree C – 1121 Degree C (1850 Degree F – 2050 Degree F), which should be followed by rapid cooling. These Stainless Steel 304L Male Elbow NPT does not respond to heat treatment, which offers higher creep and stress rupture properties than Alloy 304.
Stainless Steel 304L Tube to Male Fittings Specifications
|
||
Specifications | : | ASTM A276 ASME SA 479 |
Tube Size | : | 6mm to 38mm to 1/4″ to 1 1/2″ |
Thread |
: | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
Brass | : | ASTM B16 ASTM B 453 |
Pressure Rating | : | 6000PSI for Stainless Steel, 300/1000/3000PSI for Brass |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
SS 304L | 0.035 max | 2 max | 1.0 max | 0.045 max | 0.030 max | 18 – 20 | – | 8 – 13 | – |
Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
8.0 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 304L | 1.4306 / 1.4307 | S30403 | SUS 304L | 3304S11 | 03Х18Н11 | Z3CN18‐10 | X2CrNi18-9 / X2CrNi19-11 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Contact:
D-2, Office no. 3,
Gr. Floor, Bharat Nagar Society,
Grant Road (E), Mumbai - 400007
Tel: +91 9769056007
Email: [email protected]
Website: Sachiya Steel International