Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 410 Flanges, where better finishes are obtained in the cold drawn or heat – treated condition. In its softest condition, these Stainless Steel 410 Slip On Flanges is tough and chips build up on tools. If higher mechanical properties are required, our Stainless Steel 410 Threaded Flanges can be machined. Our Stainless Steel 410 Weld Neck Flanges are low carbon steels built around the composition of iron, 12 % chromium, and 0.12 % carbon. These Stainless Steel 410 Blind Flanges provides good corrosion resistance to air, water and some chemicals, where resistance to food acids is good.
Our Stainless Steel UNS S41000 Socket Weld Flanges shows satisfactory resistance to nitric acid, concentrated sulphuric acid, dilute acetic acid and naphtha. These Stainless Steel 410 Lap Joint Flanges has extensive use in aircraft parts, such as exhaust systems where operating temperatures are higher than 800 Degree F and where corrosive conditions are not too severe; also for the reason that of its resistance to scaling and vibration fatigue.
Stainless Steel 410 Flanges | Stainless Steel 410 Flanges | Stainless Steel 410 Flanges | Stainless Steel 410 Flanges | Stainless Steel 410 Flanges | Stainless Steel 410 Flanges | Stainless Steel 410 Flanges
Our Stainless Steel 410 Ring Joint Type Flanges may be tempered and hardened, which gives steel great hardness, but also reduces its toughness and makes it brittle, so few steels are fully hardened. These Stainless Steel 410 Spectacle Blind Flanges may be satisfactorily welded, where maximum stabilization is accomplished by annealing between 1750 Degree F and 1850 Degree F.
Stainless Steel 410 Pipe Flanges Specifications |
||
| Specifications | : | ASTM A182 / ASME SA182 |
| Size | : | 1/2″ (15 NB) to 48″ (1200NB) |
| Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
SS 410 Pipe Flanges Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 410 | 0.15 max | 1.0 max | 1.0 max | 0.040 max | 0.030 max | 11.5 – 13.5 | – | 0.50 max | – |
Stainless Steel 410 Plate Flanges Mechanical Properties
| Grade | Tensile Strength ksi (MPa) min | Yield Strength 0.2% offset ksi (MPa) min | Elongation (% in 50mm) min | Hardness (Brinell) MAX | Hardness (Rockwell B) MAX |
| 410 | 65 (450) | 30 (205) | 20 | 217 | 96 |
Equivalent Grades for 410 Stainless Steel Industrial Pipe Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | 410S21 | – | – | X12Cr13 |
SS 410 Flanges Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Sheet Plates
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 410 Pipe Fittings, which is available in reasonable price to our esteemed clients.
Stainless Steel 410 Compression Pipe Fittings is a columbium / tantalum stabilized austenitic stainless steel, and has excellent resistance to inter – granular corrosion.
SS 410 Compression Fittings should be considered for applications requiring intermittent heating between 800 Degree F / 1650 Degree F (425 Degree C / 900 Degree C).
SS 410 Accessories is resistant to atmospheric corrosion, foodstuffs, sterilizing solutions, many organic and inorganic chemicals and dyestuffs.Because of its low columbium and tantalum contents, Stainless Steel 410 Ferrule Pipe Fittings should be considered for nuclear applications.
Heat this Stainless Steel 410 Double Ferrule Pipe Fittings uniformly to forging temperature, 2100 Degree F / 2250 Degree F (1150 Degree C / 1230 Degree C) and then forge, but do not forge below 1700 Degree F (925 Degree C).
Forgings in 410 Stainless Steel Compression Pipe Fittings may be air cooled, but for maximum corrosion resistance forgings must be water quenched or subsequently annealed.Stainless Steel 410 Pipe Fittings | Stainless Steel 410 Pipe Fittings | Stainless Steel 410 Pipe Fittings | Stainless Steel 410 Pipe Fittings | Stainless Steel 410 Pipe Fittings | Stainless Steel 410 Pipe Fittings410 Stainless Steel Ferrule Pipe Fittings is used in rigid tooling and positive feeds for best machinability, and if possible a little cold work on stock to be machined.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 410 Round Bar, which are generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade.
Special consideration of Stainless Steel 410 Square Bars should be given to avoid brittle weld fractures during fabrication by minimizing discontinuities, maintaining low weld heat input and occasionally warming the part somewhat before forming.
A major difference can be attributed to the addition of Stainless Steel 410 Flat Bars to control hardening which results in the need for higher heat input to achieve penetration during arc welding.When weld filler is required, Stainless Steel 410 Threaded Bars is most often specified immersed in a warm solution of 10 % – 20 % nitric acid followed by a water rinse to remove any residual iron.
Stainless Steel 410 Hollow Bars contains a minimum of 12 % chromium, just sufficient enough to give corrosion resistant properties.
Stainless Steel 410 Hexagonal Bars has higher carbon content which is designed to optimize strength and hardness characteristics.Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round BarStainless Steel 410 Triangular Bars has good ductility it the annealed condition but is capable of being hardened the highest hardness of the 12 % chromium grades.
Due to its hardening properties, Stainless Steel 410 Bars is not often welded, although it is possible.
