Sachiya Steel International is one of the Leading Manufacturer And Exporter of Stainless Steel 410 Round Bar, which are generally considered to have slightly poorer weldability than the most common ferritic stainless steel grade. Special consideration of Stainless Steel 410 Square Bars should be given to avoid brittle weld fractures during fabrication by minimizing discontinuities, maintaining low weld heat input and occasionally warming the part somewhat before forming. A major difference can be attributed to the addition of Stainless Steel 410 Flat Bars to control hardening which results in the need for higher heat input to achieve penetration during arc welding.
When weld filler is required, Stainless Steel 410 Threaded Bars is most often specified immersed in a warm solution of 10 % – 20 % nitric acid followed by a water rinse to remove any residual iron. Stainless Steel 410 Hollow Bars contains a minimum of 12 % chromium, just sufficient enough to give corrosion resistant properties. Stainless Steel 410 Hexagonal Bars has higher carbon content which is designed to optimize strength and hardness characteristics.
Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar | Stainless Steel 410 Round Bar
Stainless Steel 410 Triangular Bars has good ductility it the annealed condition but is capable of being hardened the highest hardness of the 12 % chromium grades. Due to its hardening properties, Stainless Steel 410 Bars is not often welded, although it is possible. Its best corrosion resistance is achieved when Stainless Steel 410 Rods is hardened and surface ground or polished.
SS 410 Round Bar Specifications |
||
| Specifications | : | ASTM A276, ASME SA276 / ASTM A479 ASME SA479 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| SS 410 Round Bars |
: | Outside Diameter in the range of 4mm to 500mm |
| SS 410 Bright Bars |
: | Outside Diameter in the range of 4mm to 100mm |
| SS 410 Hex Bars | : | 18mm – 57mm (11/16″ to 2-3/4″) |
| SS 410 Square Bars |
: | 18mm – 47mm (11/16″ to 1-3/4″) |
| SS 410 Flat Bars |
: | 1/2” to 10” in thickness range of 2mm to 150mm, |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Length | : | 1 to 6 Meters, Custom Cut Lengths |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
410 Stainless Steel Round Bar Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N |
| SS 410 | 0.15 max | 1 max | 1 max | 0.040 max | 0.030 max | 11.5-13.5 | – | 0.75 | – |
Stainless Steel 410 Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| MPa – 480 | MPa – 275 |
Equivalent Grades for 410 Stainless Steel Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| SS 410 | 1.4006 | S41000 | SUS 410 | – | – | – | – |
SS 410 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website : Steel Pipe Factory
