An efficient network can be created without the usage of efficient Ethernet cables. In this regard, Cat6 Plenum Cable is one of the best available options to the network designers. They are a significant piece of any networking structure and these are the five things that you should have some familiarity with before installing it.
1. What Truly Is a Cat6 plenum Ethernet Cable?
It guarantees smooth and consistent supply of internet to the electronic hardware attached with your network. Utilizing efficient and high performance Ethernet cables upgrades network execution to a large extent.
It permit the end users to do their work without any trouble. The data transfer speed is the main concern of most networks and it can be resolved by installing high efficiency cat6 pure copper cable.
2. When do you really require an enhanced version of Ethernet Cables?
A network where the performance of the end users is highly dependent on the internet speed they are getting. The importance of the Ethernet cables is increased to a great deal. In this scenario, organizations do not compromise on their quality in any case whether it is their price or features.
Nowadays, most of the network engineers prefers to use Cat6 cable in their networks to avoid any troubleshooting problems in future. These cables are reasonably cheap in comparison to their advanced version Cat6a but more expensive than the older version cat5e.
They come with a data transfer speed of 10Gbps with a bandwidth of 350MHz. It is comparatively better than the speed of Cat5e Plenum Cable and almost same as the speed provided by Cat6a. Therefore, they become the first choice of most network administrators these days.
Some of the best features of Cat6 plenum cable are.
· Lightning fast data transfer speed
· High quality cable
· Installed at any place of the building.
· Highly fire resistant
· Do not produce toxic smoke or any other harmful substance during burning.
· Reasonable prices
3. What are some major types of Cat6 Ethernet Cable?
All network cables are not similar and each of them has a separate purpose of manufacturing. Similarly, Cat6 Ethernet cable is manufactured in 3 different types. These types are classified on the basis of their jacket ratings.
1. Cat6 Plenum rated (CMP)
2. Cat6 Riser Rated (CMR)
3. Cat6 PVC rated (CM)
All these 3 types of cables have a different purpose of manufacturing. Cat6 plenum rated that is also called CMP is manufactured to be installed at the plenum spaces of the buildings. These spaces are left for ventilation purposes and can hold these cables as well. Plenum rated outer jacket of these cables is made from such material that is fire-retardant and do not produce any toxic smoke if fire catches them. This is why they are the safest option to be installed at the plenum spaces.
Similarly, the riser jacket cables known as CMR are manufactured to be installed at the riser or vertical spaces of the buildings. They cannot be installed at the plenum spaces. They are also fire resistant and do not produce toxic smoke.
The last one is the PVC coated cables known as CM. they are manufactured to be installed at the outdoors. Their outer jacket is waterproof and UV resistant that hold them in their perfect condition for a long time in the outdoors. These cables cannot be installed at the plenum or riser spaces of the buildings.
Whereas, Plenum cable has this feature that it can be installed at other places like riser or outdoors as well but it is not recommended due to their high cost.
4. What is the difference between Shielded and unshielded Cat6 Plenum Cable?
This cable can be categorized on the basis of its shielding feature. In this regard, there are two types of Cat6 Plenum Pure Copper cable.
· Shielded Cat6 Ethernet Cable (STP)
· Unshielded Cat6 Ethernet Cable (UTP)
Now we will understand, what is the difference between these two cables?
The shielded version of the cable known as STP comes with an extra coating on its 4 twisted pairs of wires present inside its jacket. This foiling coating improves their performance against crosstalk and EMI. This coating can be present separately on each twisted pair of wire or it can be present on all 4 of them altogether.
On the other hand, the unshielded version of the cable do not have this extra coating. It is known as UTP. It is the designer’s choice that which cable they select from them to be installed in their network. STP cables are more expensive than UTP cables.
5. What kind of conductors are normally used in Cat6 Plenum cable?
Basically, there are two types of conductors used in them.
· Pure Copper
· Copper-Clad Aluminum
The cables with pure copper conductors have less DC resistivity. Therefore, they are more efficient in delivering the energy in the network without losing it to heat. Whereas, cables with copper-clad aluminum conductors are not less than by any means but they are not as efficient as pure copper conductor cables. They have high DC resistivity that forces them to lose energy into heat more than pure copper.
Pure copper cables are more in demand from the network designers as they want to save the maintenance cost which they could bear by installing a low-cost Ethernet cable. Therefore, investing, again and again, is better to invest once in a quality product
Why itechcables?
There are so many manufacturers producing cat6 plenum cable. It is a difficult decision to make for the buyers to locate a trustworthy manufacturer out of them. In this scenario, Whizcables makes your decision easy. We are providing high-quality Ethernet cables to our customers and fulfills their all networking needs satisfactorily. We provide free delivery and same day shipment services to our customers. This is why our customers always remain happy and satisfied from us.
Our 24/7 customer services representatives are available for your guidance. You can call us or leave us a message by email with your query. One of our customer support team will contact you shortly. They will provide all the guidance and help required by you. This will further make your decision-making process easy and convenient.
Whether it is retail or bulk CAT6 Ethernet cable order, BNCables takes care of everything.
Flexible orders and customized cable sizes are not a problem at all.
More and more LTE advanced networks are available worldwide, so more and more LTE advanced mobile hotspots are needed to support faster internet speeds.
Huawei E5786 and Netgear Aircard 790s are both LTE Cat.6 routers, even they are available for few years in the market, some people still don’t know what’s the difference between Huawei E5786 and Netgear AC790S.
We will review the appearance, interfaces, variant models, specs, and other features about the Netgear AC790 and Huawei E5786 to see what the key difference is so as the reference for the potential users.Huawei E5786 VS Netgear AC790S AppearanceHuawei E5786 had been available in the market for more than three years.
It has a small LCD screen to show the internet connection status.
On the top side, there is a menu button while on the opposite side, the USB 2.0 and two connectors are located.
The SIM card slot and SD card slot are at the side with Menu button.The Netgear Aircard 790s router also has a 2.4-inch screen but it’s a touchscreen where a user can do the simple setting.
The HDMI matrix switcher came into existence to solve the problems of getting high-resolution displays and high-quality audio.
Amongst many HDMI models, 8x8 HDMI matrix switchers over cat6 cable came into existence too.
The 8x8 matrix switchers can be used in different places like sports bars, clubs, mals, multimedia offices, conference rooms, educational institutes, and at every place where this kind of display is required.
They can be used to make a giant video wall.
The usage of cat6/cat5e cable is the solution for the bunch of wires, and it is only one wire that can extend the network to 165ft.
To extend the network reliably to 650ft, you can use the fiber optic HDMI cable.
