Sachiya Steel International is one of the pioneer Manufacture and Supplier of Stainless Steel 317L Buttweld Fittings, which have somewhat higher thermal conductivities than the austenitic grades, which may be an advantage in certain applications. This expansion coefficient not only varies Stainless Steel 317L Elbow it also increases slightly with temperature. Stainless Steel 317L Reducer Butt Weld Pipe Fittings has a coefficient over the temperature range Zero Degree C to 100 Degree C, but increases above this temperature.
The effect of thermal expansion in Stainless Steel 317L Tee Butt Weld Pipe Fittings is most noticeable where components are restrained, as the expansion results in buckling and bending. A problem can also arise if Stainless Steel 317L Cross Butt Weld Pipe Fittings are fabricated together and then heated, where dissimilar coefficients will again result in buckling or bending.
Stainless Steel 317L Buttweld Fittings | Stainless Steel 317L Buttweld Fittings | Stainless Steel 317L Buttweld Fittings | Stainless Steel 317L Buttweld Fittings | Stainless Steel 317L Buttweld Fittings | Stainless Steel 317L Buttweld Fittings | Stainless Steel 317L Buttweld Fittings | Stainless Steel 317L Buttweld Fittings | Stainless Steel 317L Buttweld Fittings
In general, the quite high thermal expansion rates of the austenitic Stainless Steel 317L Bends mean that fabrications in these alloys may have more dimensional problems than similar fabrications in other alloy steels.
Localized stresses from expansion during heating and cooling of Stainless Steel 317L Stub End Butt Weld Pipe Fittings can contribute to stress corrosion cracking in an environment which would not normally attack the metal. These applications of Stainless Steel 317L End Cap require design to minimize the adverse effects of temperature differentials such as the use of expansion joints to permit movement without distortion and the avoidance of notches and abrupt changes of section.
Stainless Steel 317L Pipe Fittings Specifications |
||
| Specifications | : | ASTM A403 / ASME SA403 |
| Size | : | 1/8” NB TO 48” NB. (Seamless & 100% X-Ray Welded, Fabricated) |
| Standards |
: | ASME/ANSI B16.9, ASME B16.28, MSS-SP-43 |
| Thickness | : | 5s, 10s, 40s, 80s, 10, 20, 40, STD, 60, 80, XS, 100, 120, 140, 160, XXS available with NACE MR 01-75 |
| Type | : | Seamless / Welded / Fabricated |
SS 317L Pipe Fittings Chemical Composition
| Grade | C | Mn | Si | P | S | Cr | Mo | Ni | Fe |
| SS 317L | 0.035 max | 2.0 max | 1.0 max | 0.045 max | 0.030 max | 18.00 – 20.00 | 3.00 – 4.00 | 11.00 – 15.00 | 57.89 min |
Stainless Steel 317L Butt weld Fittings Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 7.9 g/cm3 | 1400 °C (2550 °F) | Psi – 75000 , MPa – 515 | Psi – 30000 , MPa – 205 | 35 % |
Equivalent Grades for 317L Stainless Steel Pipe Fitting
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
| 317L | 1.4438 | s31703 | SUS 317L | – | – | – | X2CrNiMo18-15-4 |
Sachiya Steel International is one of the Leading Manufacture and Exporter of Stainless Steel 317L Threaded Forged Fittings, which show a much smaller rate of abrasion volume loss with increase in abrasion velocity than the austenitic steels.
Stainless Steel 317L Forged Threaded Elbow derive their outstanding properties from their capacity to resist unstable fracture of micro shear lips on the abraded surface.
This is due to the strain capacity in Stainless Steel 317L Forged Threaded Tee afforded by the mechanical inducement of the martensitic phase transformations and the high work – hardening characteristics of the transformation product.The influence of this transformation has been studied as a function of prior cold work and velocity of abrasion on a range of austenitic Stainless Steel 317L Forged Threaded Cross.
Notwithstanding these advantages of the austenitic grades, Stainless Steel 317L Forged Threaded Cap are superior in terms of cost per unit volume lost and the new ferritic – martensitic steel designated has potential as an abrasion resisting material in corrosive environments.Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings | Stainless Steel 317L Threaded Forged Fittings Complex design requirements can make Stainless Steel 317L Forged Threaded fittings necessary to combine different metallic materials within the same component.
Also, chance combinations can often be found in Stainless Steel 317L Forged Threaded Coupling, governed only by the availability of, for instance, fasteners or shims.
In certain circumstances, such mixed – material designs of Stainless Steel 317L Forged Threaded Union can lead to corrosion in one of the partner materials.
Shashwat Stainless Inc. is the largest Pipe and Tubes Manufacturers in India.
One of our popular products in the Metal Market is ASTM Pipes and Tubes.
Shashwat Stainless Inc offers a wide range of products in different materials to its customers.
We also deal with Round Bars and Pipes and Tubes, Duplex Steel & Super Duplex Steel, Buttweld Fittings, Forged Fittings, Stainless Steel and Flanges.
Sachiya Steel International is one of the Leading Manufacture And Exporter of Stainless Steel 304H Buttweld Fittings, which is unaffected by any of the weak bases such as ammonium hydroxide, even in high concentrations and at high temperatures.
Stainless Steel 304H Elbow is generally highly resistant to attack from acids, but this quality depends on the kind and concentration of the acid, the surrounding temperature, and the type of steel.
Stainless Steel 304H Tee Pipe Fittings is exposed to stronger bases such as sodium hydroxide at high concentrations and high temperatures will likely experience some etching and cracking, especially with solutions containing chlorides such as sodium hypochlorite.Stainless Steel 304H Cross Pipe Fittings are useful for storing and handling acetic acid, especially in solutions where it is combined with formic acid and when aeration is not present (oxygen helps protect stainless steel under such conditions).
Stainless Steel 304H Reducer is also commonly used with formic acid though it will tend to discolor the solution, which further resist damage from aldehydes and amines.
Stainless Steel 304H Buttweld FittingsStainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings | Stainless Steel 304H Buttweld Fittings Fats and fatty acids only affect Stainless Steel 304H Stub End Pipe Fittings at temperatures above 150 Degree C (302 Degree F), and above is unaffected at all temperatures.
Stainless Steel 304H Pipe Bend is required for processing of urea, which is a relatively poor conductor of electricity, with significantly lower electrical conductivity than copper.Stainless Steel 304H Pipe Fittings SpecificationsSpecifications:ASTM A403 / ASME SA403Size:1/8” NB TO 48” NB.
