Sachiya Steel International is one of the well – known Manufacture and Exporter of Hastelloy B2 Tube to Female Pipes, which is suitable for the device maintenance in the reduction and chemical conditions. The operations Hastelloy B2 Tube Fittings are used in the chemical processing include handling sulphuric acid, phosphoric acid, hydrochloric acid and acetic acid. The operation temperatures in Hastelloy B2 Compression Fittings vary from the ambient to 1500 Degree F on the base of environments.
Hastelloy B2 Female Connector Fittings has superior resistance to hydrochloric acid, aluminum chloride catalyst and other powerful reduction chemicals. Nickel – Cobalt alloys such as Hastelloy B2 Ferrule Fittings offering resistance to corrosion at high temperature and wearing resistance are categorized as intermediate toward tough while machining, however it is stated that the alloys are machined inexpensively.
Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes | Hastelloy B2 Tube to Female Pipes
The apparatus of Hastelloy B2 Double Ferrule Tube Fittings should be very sharp during operation, whereas for this, the tools should be changed after certain time use. Alloy B2 Compression Tube Fittings prevents the production of grain boundary carbides in the weld HAZ, therefore it’s as – welded form is suitable for use in the chemical processing environments. The availability of carbon, silicon and iron elements tends to lower reduction rate of corrosion resistance property of Alloy B2 Female Connector Tube Fittings in welded form. Hastelloy B2 Ferrule Tube Fittings has outstanding elevated temperature stability in the inert and vacuum conditions.
|
Hastelloy B2 Tube to Female Pipes Specifications
|
||
| Specifications | : | ASTM B366 ASME SB 366 |
| Size | : | OD -: 6mm to 38mm, Inch -: 1/4″ to 1 1/2″ |
| Thread | : | NPT, BSP, BSPT, UNF, ISO, SAE etc. |
| Pressure Rating |
: | 3000 – B20 PSI |
| Applicable Temperature |
: | 150-400 C |
| Type |
: | Single Ferrule tube fitting, Double Ferrule tube fitting, Hydraulic tube fitting, Instrumentation tube fitting. |
| Hastelloy B2 | Ni | C | Mo | Mn | Si | Fe | P | S | Co | Cr |
| Balance | 0.02 max | 26.0-30.0 | 1.0 max | 0.10 max | 2.0 max | 0.040 max | 0.030 max | 1.0 max | 1.0 max |
| Density | Melting Point | Yield Strength (0.2%Offset) | Tensile Strength | Elongation |
| 9.2 g/cm3 | 1370 °C (2500 °F) | Psi – 51,000, MPa – 350 | Psi -1,10,000, MPa -760 | 40 % |
| STANDARD | UNS | WERKSTOFF NR. |
| Hastelloy B2 | N10665 | 2.4617 |
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
Sachiya Steel International is one of the leading manufacturer and exporter Hastelloy B2 Tube to Union Fittings, which are made under the guidance of our skilled professionals who ensure to use latest tools and improved techniques in the manufacturing process.
Hastelloy B2 Tube Fittings (UNS N10665) is a nickel – molybdenum alloy with significant resistance to reducing environments, such as hydrogen chloride gas and sulfuric, acetic and phosphoric acids.
Molybdenum is the primary alloying element in Hastelloy B2 Compression Fittings which provides significant corrosion resistance to reducing environments.Hastelloy B2 Ferrule Fittings controls other alloying elements such as iron and chromium solved other issues concerning fabricability.
Additionally, Hastelloy B2 Union Fittings has good stress corrosion cracking and pitting resistance as well.
Meanwhile, these Hastelloy B2 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.
Welded test coupons of Alloy B2 Tube Fittings were exposed to an oxidizing sulfuric acid process solution, where many corrosion failures are associated with welds.Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings | Hastelloy B2 Tube to Union Fittings Reliable, cost effective and practical solutions to corrosion weld problems involve the use of Alloy B2 Compression Fittings filler metal.
Sachiya Steel International is a Leading Manufacturer And Exporter Hastelloy B2 Tube to Male Fittings, where all our offered products are ensured for their seamless finish and design.
These Hastelloy B2 Tube Fittings must not be used in oxidizing media or where oxidizing pollutants are accessible in reducing media.
In excess of most other metals of parallel chemistry, our Hastelloy B2 Compression Fittings offers higher protection in opposition to commanding chemical corrosion and comes by means of one of the finest high – temperature potencies of any steel.
These Hastelloy B2 Male Connector Fittings can be machined by using all the customary machining procedures.Our Hastelloy B2 Ferrule Fittings (UNS N10665) must not be used at temperatures in the range of 1000 Degree F and 1600 Degree F as the alloy forms secondary stages that may perhaps lessen the ductility of the product.
Meanwhile, these Hastelloy B2 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.
Our Alloy B2 Male Connector Tube Fittings is seldom attacked to this degree in other media, where in fact only one – third of the coupon thickness in the heat – affected zone survived the corrosion test.Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male Fittings | Hastelloy B2 Tube to Male FittingsExperiments in these Alloy B2 Tube Fittings were performed in increments of solution temperature of 5 degree C for a 24 – hour exposure period to determine the critical pitting temperature, i.e.
Sachiya Steel International is one of the leading Manufacturer and Exporter Hastelloy B2 Tube to Male Fittings, where all our offered products are ensured for their seamless finish and design.
These Hastelloy B2 Tube Fittings must not be used in oxidizing media or where oxidizing pollutants are accessible in reducing media.
In excess of most other metals of parallel chemistry, our Hastelloy B2 Compression Fittings offers higher protection in opposition to commanding chemical corrosion and comes by means of one of the finest high – temperature potencies of any steel.
These Hastelloy B2 Male Connector Fittings can be machined by using all the customary machining procedures.Our Hastelloy B2 Ferrule Fittings (UNS N10665) must not be used at temperatures in the range of 1000 Degree F and 1600 Degree F as the alloy forms secondary stages that may perhaps lessen the ductility of the product.
Meanwhile, these Hastelloy B2 Double Ferrule Fittings are also being offered in customized sizes and shapes to our customers.Our Alloy B2 Male Connector Tube Fittings is seldom attacked to this degree in other media, where in fact only one – third of the coupon thickness in the heat – affected zone survived the corrosion test.
Experiments in these Alloy B2 Tube Fittings were performed in increments of solution temperature of 5 degree C for a 24 – hour exposure period to determine the critical pitting temperature, i.e.
Sachiya Steel International is one of pioneer Manufacture and Exporter for Hastelloy C22 Tube to Female Pipes, which has shown moderate to poor resistance to hydrochloric acid.
In sulphuric acid, Hastelloy C22 Tube Fittings has shown useful resistance to concentrations of up to about 30 % at a temperature of 175 Degree F and about 10 % at boiling temperature.
Laboratory tests of Hastelloy C22 Compression Fittings at 175 Degree F have produced corrosion rates at 10 % concentration.Hastelloy C22 Ferrule Fittings has excellent resistance to phosphoric acid, which also gives rates for phosphoric acid containing 1 % of hydrofluoric acid.
Hastelloy C22 Double Ferrule Fittings has good fabricability, where annealing for cold forming should be done at 1900 Degree F. Forming, machining, and welding are carried out by standard procedures for Hastelloy C22 Female Connector Fittings.
The temperature range of Alloy C22 Compression Tube Fittings for heavy forming or forging is 1850 Degree F to 2200 Degree F, where light working can be done at temperatures down to 1700 Degree F.Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female Pipes | Hastelloy C22 Tube to Female PipesAlloy C22 Ferrule Tube Fittings is readily cold formed by conventional procedures although its work – hardening rate is high.
For best results, Alloy C22 Double Ferrule Tube Fittings should be cold formed in the fine – grain condition, and frequent intermediate anneals should be used.
