Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Round Bars, which is extremely resistant to corrosion, even in acidic environment. Our Incoloy 825 Square Bars is also used in Chemical process equipment, Tank trucks, Propeller shafts, Electrostatic precipitator electrodes, Calorifiers, Hot vessels for food, water and sea – water. The fabrication of these Incoloy 825 Flat Bars is typical of nickel – base alloys, with material being readily formable and weldable by a variety of techniques. The titanium addition serves, by means of an appropriate heat treatment, to stabilize our Incoloy 825 Threaded Bars against sensitization to inter – granular corrosion.
These Incoloy 825 Hollow Bars is characterized by good toughness, even under continuous operation, at both room and elevated temperatures, up to approximately 550 Degree C (1020 Degree F). Our Incoloy 825 Hexagonal Bars is a nickel – base alloy generally similar to Alloy 20 in aqueous corrosion, which requires no post – weld heat treatment. These Incoloy 825 Triangular Bars has good stress corrosion cracking resistance performance, along with good resistance for pitting and crevice corrosion performance.
Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars
Our Incoloy 825 Bars is a nickel – iron – chromium alloy with molybdenum and copper added to it, which is often used for components in pickling equipment like tanks, baskets, chains and heating coils. These Incoloy 825 Rods is an austenitic nickel – iron – chromium alloy with additions of other alloying elements to enhance resistance to chemical corrosion.
Incoloy 825 Round Bar Specifications |
||
| Specifications | : | ASTM B425 / ASTM SB425 |
| Dimensions | : | EN, DIN, JIS, ASTM, BS, ASME, AISI |
| Size |
: | 5 mm To 500 mm |
| Diameter | : | 0.1 mm to 100 mm |
| Length | : | 100 mm To 3000 mm Long & Above |
| Finish | : | Black, Bright Polished, Rough Turned, NO.4 Finish, Matt Finish, BA Finish |
| Tolerance | : | H8, H9, H10, H11, H12, H13K9, K10, K11, K12 or as per clients’ requirements |
| Form | : | Round, Square, Hex (A/F), Rectangle, Billet, Ingot, Forging Etc. |
825 Incoloy Round Bar Chemical Composition
| Grade | C | Mn | Si | Al | S | Cr | Cu | Ni | Fe | Ti |
| Incoloy 800 | 0.05 max | 1.00 max | 0.05 max | 0.02 max | 0.03 max | 19.50-23.50 | 1.50-3.00 | 38.0-46.0 | 22.0 min | 0.06 – 1.20 |
Incoloy Alloy 825 Rods Mechanical Properties
| Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Equivalent Grades for 825 Incoloy Round Bar
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Incoloy 825 Round Bar Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes,Tubes ,Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran and many other countries.
Email: [email protected]
For More Information Visit Our Website: Steel Pipe Factory
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 925 Round Bars, which is mainly used in components and parts for the production of natural gas and oil.
Incoloy 925 Square Bars is also used in the petroleum industry for applications such as gas well components, tubing and valves, as well as finding use in high – strength piping systems.
Incoloy 925 Flat Bars offers good resistance to stress corrosion cracking, crevice corrosion and numerous aqueous environments including those containing chlorides and sulfides.
Molybdenum in Incoloy 925 Flat Bars aids resistance to pitting and crevice corrosion, while chromium provides resistance to oxidizing environments.Temperature of Incoloy 925 Threaded Bars should not exceed above 983 Degree C (1800 Degree F) in order to restore corrosion resistance of this alloy.
High speed steel tools in Incoloy 925 Hollow Bars may be used for interrupted cuts, finishing closing tolerances and cutting with the least amount of cold work hardening.
Incoloy 925 Hexagonal Bars has good machinability in both the solution – treated and aged conditions.Incoloy 925 Round Bars | Incoloy 925 Round Bars | Incoloy 925 Round Bars | Incoloy 925 Round Bars | Incoloy 925 Round Bars | Incoloy 925 Round Bars | Incoloy 925 Round Bars | Incoloy 925 Round BarsIncoloy 925 Triangular Bars is austenitic nickel – iron – chromium alloy made precipitation harden able by additions of titanium and aluminum.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Pipe Fittings, Accessories, which is used in practical immunity to chloride stress corrosion cracking (SCC) and resists polythionic acid SCC.
The chief characteristic of these Incoloy 825 Compression Fittings tubing is its corrosion resistance, where water – base coolants are preferred for high speed operations such as grinding, turning, or milling.
Incoloy 825 Compression Pipe Fittings is often used in sulfuric acid piping and vessels, marine exhaust systems, hot vessels for food, water and sea water.Also, Applications for these Incoloy 825 Accessories are similar to those for alloy 20, where high nickel content made it with effective stress corrosion cracking resistance performance.
If matching alloy is not available, then Alloy 825 Compression Fittings richer in the essential chemistry (Ni, Co, Cr, and Mo) should be used, where in addition all weld beads should be slightly convex.
These Alloy 825 Compression Pipe Fittings can be readily hot or cold worked.
Hot working should be in the range 870 Degree C – 1180 Degree C, finishing at 870 Degree C – 980 Degree C.Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe FittingsThe nickel content of Alloy 825 Accessories makes it resistant to chloride stress – corrosion cracking, and combined with molybdenum and copper, provides substantially improved corrosion resistance in reducing environments when compared to conventional austenitic stainless steels.
Sachiya Steel International is one of the Leading Manufacturer And Exporters of Incoloy 825 Flanges to clients.
Chromium content in Incoloy 825 Slip-On Flanges (UNS N08825) gives resistance to oxidizing conditions, such as nitric acid solutions, nitrates, and oxidizing salts.
These Incoloy 825 Spectacle Blind Flanges help avoid stress – corrosion cracking and have good weldability by all conventional processes.
Incoloy 825 Weld Neck Flanges plays a significant role in heat exchangers for chemical processing, pollution control equipment, oil well, and gas gathering pipes – even as clad steel pipes – where resistance to stress cracking or general corrosion to a range of reducing or oxidizing acids is required.Meanwhile, these Incoloy 825 Lap Joint Flanges are also being offered in different sizes and shapes to our customers.
Between the Molybdenum, Nickel, and Titanium, Incoloy UNS N08825 Threaded Flanges gives outstanding resistance to sulfuric and phosphoric acids.
These Incoloy 825 Socket Weld Flanges is often used in Air-cooled heat exchangers in petroleum refineries, Chemical and Food Processing.Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 FlangesIncoloy 825 Blind Flanges is essential to thoroughly clean all traces of lubricants after forming as embrittlement of the alloy may occur at high temperatures as a result.
Sachiya Steel International is one of the Manufacturer And Exporter of Incoloy 825 Tube to Male Fittings, which has good weldability for all conventional processes.
Heavy duty machining equipment and tooling in Incoloy 825 Tube Fittings should be used to minimize chatter or work-hardening of the alloy ahead of the cutting.
Incoloy 825 Compression Fittings is the face – centered cubic lattice structure, which is hardened by cold work only.
If exposed for long times to the sensitive temperature range 1200 Degree F – 1400 Degree F, Incoloy 825 Compression Tube Fittings may exhibit severe inter – granular corrosion in certain very aggressive environments.However, exposure to temperatures above 1000 Degree F in Incoloy 825 Ferrule Fittings can result in microstructural changes that significantly lower ductility and impact strength.
In reducing & oxidizing conditions, Incoloy 825 Double Ferrule Fittings resists general corrosion, pitting and crevice corrosion, inter – granular corrosion and stress corrosion cracking.
Incoloy 825 Male Connector Fittings is an austenitic nickel – iron – chromium alloy with additions of molybdenum, copper and titanium, where the corrosion resistance of deposited weld metal from both covered electrode and bare wire is equivalent to that of the parent metal.The resistance of Alloy 825 Tube Fittings to general and localized corrosion under diverse conditions gives the alloy broad usefulness.
