Sachiya Steel International is one of the Leading Manufacturer And Exporters of Incoloy 825 Flanges to clients. Chromium content in Incoloy 825 Slip-On Flanges (UNS N08825) gives resistance to oxidizing conditions, such as nitric acid solutions, nitrates, and oxidizing salts. These Incoloy 825 Spectacle Blind Flanges help avoid stress – corrosion cracking and have good weldability by all conventional processes. Incoloy 825 Weld Neck Flanges plays a significant role in heat exchangers for chemical processing, pollution control equipment, oil well, and gas gathering pipes – even as clad steel pipes – where resistance to stress cracking or general corrosion to a range of reducing or oxidizing acids is required.
Meanwhile, these Incoloy 825 Lap Joint Flanges are also being offered in different sizes and shapes to our customers. Between the Molybdenum, Nickel, and Titanium, Incoloy UNS N08825 Threaded Flanges gives outstanding resistance to sulfuric and phosphoric acids. These Incoloy 825 Socket Weld Flanges is often used in Air-cooled heat exchangers in petroleum refineries, Chemical and Food Processing.
Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges | Incoloy 825 Flanges
Incoloy 825 Blind Flanges is essential to thoroughly clean all traces of lubricants after forming as embrittlement of the alloy may occur at high temperatures as a result. These Incoloy 825 Ring Joint Type Flanges is titanium stabilized to resist pitting and intergranular attack after fabrication, particularly welding, which includes heating in the critical sensitization temperature range (650 Degree C – 760 Degree C).
Incoloy 825 Pipe Flanges Specifications |
||
| Specifications | : | ASTM B564 / ASME SB564 |
| Size | : | 1/2″NB TO 60″NB |
| Standards |
: | ANSI/ASME B16.5, B 16.47 Series A & B, B16.48, BS4504, BS 10, EN-1092, DIN, etc. |
| Class / Pressure | : | 150#, 300#, 600#, 900#, 1500#, 2500#, PN6, PN10, PN16, PN25, PN40, PN64 etc. |
| Standard | : | ANSI Flanges, ASME Flanges, BS Flanges, DIN Flanges, EN Flanges, etc. |
Incoloy Alloy 825 Pipe Flanges Chemical Composition
| Grade | C | Mn | Si | S | Cu | Fe | Ni | Cr | Al | Ti |
| 825 | 0.05 max | 1.00 max | 0.5 max | 0.03 max | 1.50 – 3.00 | 22.00 min | 38.00 – 46.00 | 19.50 – 23.50 | 0.02 max | 0.06 – 1.20 |
Incoloy 825 Plate Flanges Mechanical Properties
| Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
| 825 | 8.14 g/cm3 | 1400 °C (2550 °F) | Psi – 80,000 , MPa – 550 | Psi – 32,000 , MPa – 220 | 30 % |
Equivalent Grades for 825 Incoloy Industrial Pipe Flanges
| STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN | OR |
| Incoloy 825 | 2.4858 | N08825 | NCF 825 | NA 16 | ЭП703 | NFE30C20DUM | NiCr21Mo | XH38BT |
Alloy 825 Flanges Application Industries
- Off-Shore Oil Drilling Companies
- Power Generation
- Petrochemicals
- Gas Processing
- Specialty Chemicals
- Pharmaceuticals
- Pharmaceutical Equipment
- Chemical Equipment
- Sea Water Equipment
- Heat Exchangers
- Condensers
- Pulp and Paper Industry
About Us:
Sachiya Steel International are manufacturers & exporters of Pipes, Tubes, Pipe Fitting, Fasteners.
Sachiya Steel International is an internationally acclaimed Pipes And Tubes manufacturing company that exports to more than 90 countries worldwide. We export our high-quality fasteners in Saudi Arabia, Oman, UAE, Dubai, Kuwait, Qatar, Mexico, USA, Malaysia, Iran, and many other countries.
Email: [email protected]
For More Information Visit Our Website: Sachiya Sheet Plates
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Pipe Fittings, Accessories, which is used in practical immunity to chloride stress corrosion cracking (SCC) and resists polythionic acid SCC.
The chief characteristic of these Incoloy 825 Compression Fittings tubing is its corrosion resistance, where water – base coolants are preferred for high speed operations such as grinding, turning, or milling.
Incoloy 825 Compression Pipe Fittings is often used in sulfuric acid piping and vessels, marine exhaust systems, hot vessels for food, water and sea water.Also, Applications for these Incoloy 825 Accessories are similar to those for alloy 20, where high nickel content made it with effective stress corrosion cracking resistance performance.
If matching alloy is not available, then Alloy 825 Compression Fittings richer in the essential chemistry (Ni, Co, Cr, and Mo) should be used, where in addition all weld beads should be slightly convex.
These Alloy 825 Compression Pipe Fittings can be readily hot or cold worked.
Hot working should be in the range 870 Degree C – 1180 Degree C, finishing at 870 Degree C – 980 Degree C.Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe Fittings | Incoloy 825 Pipe FittingsThe nickel content of Alloy 825 Accessories makes it resistant to chloride stress – corrosion cracking, and combined with molybdenum and copper, provides substantially improved corrosion resistance in reducing environments when compared to conventional austenitic stainless steels.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Round Bars, which is extremely resistant to corrosion, even in acidic environment.
Our Incoloy 825 Square Bars is also used in Chemical process equipment, Tank trucks, Propeller shafts, Electrostatic precipitator electrodes, Calorifiers, Hot vessels for food, water and sea – water.
The fabrication of these Incoloy 825 Flat Bars is typical of nickel – base alloys, with material being readily formable and weldable by a variety of techniques.
The titanium addition serves, by means of an appropriate heat treatment, to stabilize our Incoloy 825 Threaded Bars against sensitization to inter – granular corrosion.These Incoloy 825 Hollow Bars is characterized by good toughness, even under continuous operation, at both room and elevated temperatures, up to approximately 550 Degree C (1020 Degree F).
Our Incoloy 825 Hexagonal Bars is a nickel – base alloy generally similar to Alloy 20 in aqueous corrosion, which requires no post – weld heat treatment.
These Incoloy 825 Triangular Bars has good stress corrosion cracking resistance performance, along with good resistance for pitting and crevice corrosion performance.Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round Bars | Incoloy 825 Round BarsOur Incoloy 825 Bars is a nickel – iron – chromium alloy with molybdenum and copper added to it, which is often used for components in pickling equipment like tanks, baskets, chains and heating coils.
Sachiya Steel International is one of the Leading Manufacturer And Exporter of Incoloy 825 Forged Threaded Fittings, which has some excellent features such as cost effectiveness, rugged design, durable finish and more.
Incoloy 825 Forged Threaded Elbow (UNS N08825) is an austenitic nickel – iron – chromium – molybdenum – copper alloy containing high levels of chromium, molybdenum, nickel and copper to provide high levels of corrosion resistance to both moderately oxidizing and moderately reducing environments.
Incoloy 825 Forged Threaded Tee is used in chemical processing, nuclear fuel reprocessing, acid production, propeller shafts and oil and gas well piping.The hot – working range for Incoloy 825 Forged Threaded Cross is 1600 to 2150 Degree F, where most any commercial coolant may be used in the machining operations.
Meanwhile, these Incoloy 825 Forged Threaded Cap are also being offered in different sizes and shapes to our customers.
The molybdenum in Incoloy 825 Forged Threaded Fittings prevents resistance to pitting and crevice corrosion.
Incoloy 825 Forged Threaded Coupling is also used in chemical process equipment, propeller tubes, tank trucks; and spent nuclear fuel element recovery.The high nickel content gives Incoloy 825 Forged Threaded Union exceptional resistance to general corrosion, pitting, crevice corrosion, intergranular corrosion as well as stress corrosion cracking.
Sachiya Steel International is one of the leading Manufacturer And Exporters of Incoloy 925 Flanges, which are made by using the finest quality material.
Incoloy 925 Threaded Flanges (UNS N09925) can also be used for fasteners, and for pump shafts in marine environments.
Molybdenum in Incoloy 925 Slip-On Flanges aids resistance to pitting and crevice corrosion whilst Chromium offers resistance to oxidizing environments.
Incoloy 925 Spectacle Blind Flanges has resistance to chloride-ion stress – corrosion cracking.
Because the Incoloy 925 Weld Neck Flanges offers excellent corrosion resistance in both oxidizing and reducing environments, the grade has proven useful in many “sour” applications in oil and natural gas applications.Tooling and heavy-duty machining equipment are used to reduce the work-hardening of these Incoloy 925 Lap Joint Flanges.
Meanwhile, these Incoloy 925 Blind Flanges are also being offered in different sizes and shapes to our customers.
Sachiya Steel International is leading manufacturer and exporter of Incoloy 825 Tube to Union Fittings, which are made by using quality material.
Incoloy 825 Tube Fittings (UNS N08825) is used in temperatures up to 1020 Degrees F. Chemical composition of Incoloy 825 Compression Fittings provides great resistance to a lot of corrosive environments, such as pitting, crevice corrosion, inter – granular corrosion, and stress- corrosion cracking.
The levels of molybdenum and copper enable Incoloy 825 Ferrule Fittings to resist reducing agents and acids.Heavy duty machining equipment and tooling should be used in Incoloy 825 Double Ferrule Fittings to minimize chatter or work – hardening of the alloy ahead of the cutting.
Meanwhile, these Incoloy 825 Compression Tube Fittings are also being offered in different sizes and shapes to our customers.
Alloy 825 Tube Fittings does work – harden during machining and has higher strength and “gumminess” not typical of steels.
The hot- working range for Alloy 825 Compression Fittings is 1600 Degree F to 2150 Degree F.Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings |Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union Fittings | Incoloy 825 Tube to Union FittingsAlloy 825 Ferrule Fittings is used for chemical processing, pollution – control equipment, nuclear fuel reprocessing, oil and gas well piping, acid production, pickling equipment and more.
